Circuit Board Designs

For my starting circuit designs I went forward with making them applicable to my projects going forward. I'm not sure how to properly setup external power supplies for larger outputs so that's likely to change however the designs are intended to work regardless.

This first design  is intended to work with Piezo buzzer discs for receiving a signal, I am using the digital pins for power in case I ever want to use this design for an audio output. There are two potentiometers, one for adjusting the sensitivity of the discs for input and the other is for adjusting the LED intensity for the output. I've used the button to bridge over the ground for the potentiometers and the LED power.

 This circuit is for powering multiple parallel LED strips with a joystick, I have the same potentiometer for adjusting LED intensity as well I had to use jumper cables to bridge all the grounds for the LED. Not much difference aside from the 5 points for the Joystick.

Working Joystick Breadboard

Going forward Im still considering the different sensors and I don't yet know the proper way to implement a power supply so those are undoubtedly going to change going forward.